|
Dettagli:
|
| Capacità Nominale: | 300ah | Corrente di carica massima: | 200A |
|---|---|---|---|
| Corrente di ricarica standard: | 100A | Tipo di cella: | cellula lifepo4 |
| Comunicazione: | CAN/RS485/RS232/Bluetooth (opzionale) | Voltaggio nominale: | 51,2 V |
| Tensione di taglio di ricarica: | 56,2 V | Corrente di scarica massima: | 400A |
| Scarico della tensione d'interdizione: | 45.6V | Dimensioni della batteria: | 442*820*142mm |
| Corrente di scarica massima: | 200A | Energia nominale: | 10240Wh |
| Evidenziare: | Modular LiFePO4 Battery with warranty,Scalable Capacity Home Battery Storage,Renewable Energy Storage with cell monitoring |
||
The KM51V300P2 is a 48V 200Ah LiFePO₄ battery engineered for maximum lifespan and uncompromising safety. Rated for more than 8000 cycles, it delivers over 15 years of reliable service in residential solar storage. Its intelligent BMS provides 6‑layer protection plus automatic cell balancing, ensuring every charge and discharge is safe and efficient.
8000+ Cycle Life: LiFePO₄ chemistry with advanced electrode formulation – retains 80% capacity after 8000 cycles.
Comprehensive BMS: Overcharge, over‑discharge, over‑current, temperature, short‑circuit, and cell imbalance protection.
Real‑Time Cell Monitoring: LCD display shows voltage, current, SOC, and individual cell status.
Auto Balancing: Active balancing between cells extends pack life and maximizes usable capacity.
High Discharge Rate: Continuous 200A (10kW) and peak 400A (20kW) supports heavy appliances like AC and water pumps.
Wide Operating Range: Discharge from -20°C to 60°C; charge from 0°C to 55°C.
Industry‑Leading Cycle Life: 8000 cycles at 80% DoD – 3x longer than standard LFP batteries.
Full BMS Transparency: Monitor every cell via LCD or Bluetooth – never guess battery health.
Zero Maintenance: No watering, no equalization, no acid spills – just install and forget.
5‑Year Performance Guarantee: If capacity drops below 70% within 5 years, we replace free.
Q: Can I connect multiple batteries in parallel?
A: Yes. Up to 3 units can be paralleled to reach 30kWh. The built‑in BMS automatically balances them.
Q: Does it work with my existing solar inverter?
A: It works with most 48V inverters supporting CAN/RS485 communication. Check compatibility before purchase.
Q: How long does it take to fully charge?
A: At 100A standard charge, about 2 hours. With max 200A, about 1 hour (if supported by charger).
Q: Is it safe to install indoors?
A: Absolutely. LiFePO₄ is non‑flammable and emits no gas. Install in a dry, ventilated area.
Persona di contatto: Mr. Lily
Telefono: 18363367612